23 February 2013

Angel of Music

Angel of Music

This tutorial was written by me on February 23rd, 2013 and was written assuming you have a general knowledge of PSP.  You will need the following supplies:

I used a stunning full-size kit by Stina of Designs by Stina called "Angel Of Music".  Please visit Stina's blog HERE to find links to her stores.  Thank you for this beautiful kit hun!

One tube of choice.  I used The Vintage Angel™ by Jessica Galbreth.  This tube is called "Renaissance Angel" and is available at CDO.  Please don't use without a license.

Mask #79 by Vaybs.

Font: I used Houston Pen, a PTU font.

~~ Remember to save often! ~~

Place the mask in your PSP mask folder or a folder of your choice.

Open a new image, 800 x 800, white background.

From the kit, open Frame 05 and resize 20%, then 85%.  Copy and paste as a new layer.

Using the rectangle selection tool, draw out a selection over the frame.

Open Paper 17 and resize 15%.  Copy and paste as a new layer, move beneath the frame.  Invert selection and tap delete; deselect.

Open Piano 02 and resize 10%, then 90%.  Copy and paste as a new layer and arrange within the frame, see my tag for placement.

Activate the rectangle selection tool again and draw out a selection from the base of the pillars to the bottom of the previous paper.

Open Paper 07 and resize 10%.  Copy and paste as a new layer above the previous paper layer; invert the selection and tap delete.  Deselect.  You should now have something that looks like this.



This is how it looks with the frame:



Drop shadow the frame and piano layers, I used H&V 2, Opacity 53, Blur 8.

Copy and paste your tube as a new layer and move to the right side of the frame.  Apply drop shadow, I used V 2, H 8, Opacity 40, Blur 15.

Using the rectangle selection tool, draw a very thin selection across the bottom of the tube.

Selections > Modify > Feather > Number of pixels: 7 > Click OK.  This will remove the hard edge at the bottom of your tube.

Add your elements, I used:

Music Sheet: resize 10%; free rotate 12 degrees left and sharpen.
Mirror: resize 15%, then 75%.
Phantom Mask 02: resize 15%, then 90%.
Rose Stem 01: resize 7%, then 80%; flip, mirror.
Music Notes 01: resize 30%.  Select all, float and defloat.  Add a new raster layer and flood fill twice with #4a0000.  Deselect and delete original layer.
Music Notes 02: resize 30%.  Repeat the steps above.
Word Art 02: resize 15%, then 75%.  Repeat the steps above.
Butterfly (comes with the tube): resize 25%; duplicate and mirror.

Apply drop shadow to all elements, I used: H&V 2, Opacity 53, Blur 8.

Hide the background layer and merge visible.  Resize the merged layer 90%.  Unhide the background layer and add a new raster layer.  Select all.  Copy and paste Paper 09 into the selection.  Deselect.  Apply Vaybs mask #79 and merge the mask group.  Use the raster deform tool to adjust the size and placement of the mask.

Add your name.  If using the Houston Pen font, use these settings: Size: 72, Stroke: 0, Create as a Vector, Colour #4a0000.  Type your name, click Apply and place where desired.  Layers > Convert to Raster Layer.  Apply drop shadow, I used H&V 2, Opacity 53, Blur 8.

Crop and resize your tag.

Add all applicable copyright and license information.  Save as a png and you're done, thanks for trying my tutorial!

Hugs, Carol♥

22 February 2013

Catch Me A Leprechaun

Catch Me A Leprechaun

This tutorial was written by me on February 22nd and was written assuming you have a general knowledge of PSP.  You will need the following supplies:

I used a great new St. Patrick's scrap kit by DnScraps called "Journey Through The Lot" and is available at Scraps From The Heart.  Thanks so much Conchi!

I used the sexy pinup artwork of Keith Garvey.  Please don't use without a license.

St. Patrick's template collab #2 is available at Dees'Sign Depot.

Mask #82 from Signature Collections.

Plug-in used: Eye Candy 4000; Gradient Glow

Font used: Paternoster, HERE.

~~ Remember to save often! ~~

Place the mask in your PSP mask folder or a folder of your choice.

Open the template in PSP, shift + d to duplicate and close the original.

Resize all 85%.  Change the canvas size to 800 x 750.  Unhide the background layer and flood fill the blank area with white.

Foreground: #0d3b0c
Background: #f4f214

Change foreground to gradient with these settings:

From the drop down menu, select "Foreground/Background".
Style: Linear
Angle: 45
Repeats: 3
Invert: unchecked
Click OK.

Activate Raster 5.  Select all, float and defloat.  Add a new raster layer and flood fill with the gradient.  Deselect and delete original layer.  Duplicate, flip, mirror and arrange at the top of the template.  See my tag for placement.  Apply drop shadow, I used H&V 2, Opacity 52, Blur 8.

Activate gold glitter arch layer; select all, float and defloat.  Add a new raster layer and flood fill with the background colour.  Deselect and delete original layer.

Adjust > Add/Remove Noise > Add Noise > Uniform, 80%, Monochrome checked.  Click OK.

Activate arch frame layer; select all, float and defloat.  Add a new raster layer and flood fill with the foreground colour.  Apply a drop shadow, I used H&V 0, Opacity 42, Blur 12

Activate top dark green circle layer; select all, float and defloat.  Add a new raster layer and flood fill with the foreground colour.  Deselect and delete original layer.  Repeat for the small circle layer and the dark green frame layer.  Apply drop shadow above. 

Activate gold shamrocks layer; select all, float and defloat.  Add a new raster layer and flood fill with the background colour.  Deselect and delete original layer.  Repeat for the "gonna catch me a" layer.  Apply drop shadow, I used H&V 2, Opacity 52, Blur 8.

Activate green glitter frame layer; select all, float and defloat.  Add a new raster layer and flood fill with the background colour.  Deselect and delete original layer.  Add noise effect using the settings above.  Repeat for gold glitter arch layer.

Activate green arch insert layer; select all, float and defloat.  Add a new raster layer and flood fill with #813d1a.  Deselect and delete original layer.  Apply drop shadow above.

Activate Leprechaun black layer; select all, float and defloat.  Add a new raster layer and flood fill with the foreground colour.  Deselect and delete original layer.

Activate orange shape layer; select all, float and defloat.  From the kit, open Paper 11 and resize 70%.  Copy and paste as a new layer.  Invert selection and tap delete.  Deselect and delete original layer.

Activate green center shape layer; select all, float and defloat.  Open Paper 6 and resize 70%.  Copy and paste as a new layer and arrange as desired in the selection.  Invert selection and tap delete.  Do not deselect.

Open the close-up tube, copy and paste as a new layer and arrange within the selection.  Tap delete and deselect.  Change the blend mode to Soft Light.  Apply drop shadow, I used H&V 2, Opacity 52, Blur 8.

Copy and paste your main tube on the left side of the tag.  Drop shadow, I used H 7, V 2, Opacity 55, Blur 10.

Add your elements, I used:

goldpot2: resize 35%
coinspot2: resize 25%, then 75%
cupcake: resize 15%, then 85%
leprechaun: resize 30%
lepredraun: resize 30%, then 90%
shamrock2: resize 15%, then 90%

Apply drop shadow to all elements, I used H&V 2, Opacity 52, Blur 8.

Hide the background layer and merge visible.  Resize the merged layer 85%.  Activate the background layer and add a new raster layer.  Select all.  Open Paper 3, copy and paste into the selection.  Deselect.  Apply Signature Collections mask #82 and merge the mask group.  Use the raster deform tool to adjust size and placement.

Crop and resize your tag.

Select the text tool and choose the Paternoster font; Size 48, Stroke 0, Create As A Vector and colour #0d3b0c.  Type your name and click Apply.  Place where you like.  Layers > Convert to Raster layer.

Effects > Plugins > Eye Candy 4000 > Gradient Glow.

Under the Colour tab:

Choose "Fat" from the list.  Leave the colour set to white and move the second paint pot to the left, as indicated below.


Under the Basic tab:

Glow Width: 3.00
Soft Corners: 0
Overall Opacity: 100
Draw Only Outside Selection: checked

Click OK.

Apply a drop shadow to your name, I used H 3, V 2, Opacity 42, Blur 5.

Add all applicable copyright and license information.  Save as a png and you're finished!  Thanks for trying my tutorial!  : )

Hugs, Carol♥


18 February 2013

The Game Of Love

The Game Of Love

This tutorial was written by me on February 18th, 2013 and was written assuming you have a general knowledge of PSP.  You will need the following supplies:

Beautiful scrap kit created by Tootypup Scraps entitled "The Game of Love".  Please visit Susan's blog HERE for links to her stores.  Thank you for this gorgeous kit hun!

I used the pinup art of Ted Hammond.  Ted was with CILM when I purchased this tube but you can now purchase his work from CDO.  You must have a license to use.

Mask #80 from Signature Sensations.

Plug-in used: Eye Candy 4000, Gradient Glow.

Font: York Script ES Regular, HERE.

~~ Remember to save often! ~~

Place the mask in your PSP mask folder, or a folder of your choice.

Open a new image, 800 x 700, white background.

From the kit, open FrameCameo_01 and resize 45%.  Copy and paste as a new layer.

Activate the Freehand Selection tool and draw a selection around the frame, like this:



Open Paper_01 and resize 60%.  Copy and paste as a new layer and position within the selection.  Invert selection and tap delete.  Do not deselect.

Open the tube and resize 150%.  Copy and paste as a new layer and position within the selection, on the right side.  Tap delete, do not deselect.  Change the blend mode to Overlay.

Open Chess_02 and resize 50%.  Copy and paste as a new layer and position as shown.  Tap delete and deselect.

Open CardOfHearts_01 and resize 20%, then 80%.  Duplicate and free rotate 12.5 degrees left.  Duplicate the original once again and free rotate 25 degrees left.  Move the two copies below the original.  Duplicate both copies and mirror, arrange above the original layer.  Merge these 5 layers together and free rotate the merged layer 10 degrees left.  Arrange as shown.

Apply a drop shadow to the tube, frame and cards.  I used H&V 2, Opacity 55, Blur 10.

Copy and paste your tube as a new layer; move to the right of the frame.  Drop shadow.

Open ChessPieces_01 and resize 40%.  Copy and paste as a new layer and arrange by her hands (see my tag for placement).  Duplicate and move the copy below the tube.  Working on the original, zoom in and erase the parts covering her hand.  Apply a drop shadow of choice (see above) to the bottom layer (copy) only.

Add your elements, I used:

Flowers_01: resize 60%; duplicate
ChessKing_01a: resize 17%
ChessBishop_01a: resize 12%
ChessPorn_01a (I think she meant ChessPawn, ;^)): resize 10%; duplicate
Deco_01: resize 50%; duplicate
TheGameofLove_03: resize 30%

Apply drop shadow to all elements, using the settings above or of your choosing.

Hide the background layer and merge visible.  Unhide the background layer.

Set your background colour to #4d3042

Activate the text tool and choose York Script ES Regular.  Size 48, Stroke 0, Create as a Vector.  Type "It's all in the game of Love" and apply.  Arrange where desired and convert to a raster layer (Layers > Convert to Raster Layer).

Effects > Plugins > Eye Candy 4000 > Gradient Glow with these settings:

Under the Colour tab: choose "Medium" and set the colour to #f1f8ba.

Under the Basic tab:

 Glow Width: 3.00
Soft Corners: 0
Overall Opacity: 100
Draw Only Outside Selection: checked

Click OK.  Apply drop shadow, I used H&V 2, Opacity 55, Blur 5.

Add your name using the same settings, except set size to 72.  Apply the Gradient Glow effect using the same settings.  Drop shadow.

Activate the background layer and add a new raster layer.  Select all.  Copy and paste Paper_03 into the selection; deselect.  Apply Signature Sensations mask #80 and merge the mask group.  Use the raster deform tool to adjust size and placement if desired.

Crop and resize your tag.  Save as a png or jpg and you're finished.  I hope you enjoy your new tag!

Hugs, Carol

17 February 2013

Just Breathe

Just Breathe

This tutorial was written by me on February 17th, 2013 and was written assuming you have a general knowledge of PSP.  You will need the following supplies:

I used a beautiful kit by BabyCakes Scraps called "Just Breathe - TS", which is available at Bella Zingaro Studio.  Thank you for this lovely kit Lynne!

I used the beautiful pinup art of Jennifer Janesko, who was with CILM when I purchased this tube.  You can now find Jennifer's work at CDO.  You must have a license to use.

Template #150 by Horseplay's Pasture.  Template link is at the top left.

Mask #111 by Vaybs.

Plug-in used: Eye Candy 4000; Gradient Glow.

Font: Doris Day, HERE.

~~ Remember to save often! ~~

Place the mask in your PSP mask folder or a folder of your choice.

Open the template in PSP, shift + d to duplicate and close the original.

Delete the credit layer and change the canvas size to 750 x 750.  Activate the background layer and flood fill the blank area with white.

Activate Square 1, select all, float and defloat.  Open paper #11 and resize 70%.  Copy and paste as a new layer; invert the selection and tap delete.  Deselect and delete original layer. Apply a drop shadow of choice, I used H&V 0, Opacity 65, Blur 12.

Repeat the steps above for Square 2, Lines and Glitter Circle layers.  Drop shadow.

Activate Rectangle layer, select all, float and defloat.  Open paper #6 and resize 70%.  Copy and paste as a new layer, position as desired.  Invert selection and tap delete.  Deselect and delete original layer.  Apply drop shadow above.

Activate Circle layer; select all, float and defloat.  Open paper #9 and resize 70%.  Copy and paste as a new layer, invert selection and tap delete.  Do not deselect.

Open the tube, copy and paste as a new layer within the selection.  Position as shown in my tag and tap delete.  Do not deselect.

Resize the tube 110%, copy and paste as a new layer and move below the original tube layer.  Position to the right of the original tube, see my tag for reference.  Tap delete and deselect.  Change the blend mode to Soft Light and reduce the opacity to 65.  Apply a drop shadow to your original tube, I used H&V 2, Opacity 55, Blur 15.

Add your elements, I used:

#30: resize 35%; duplicate 2x and mirror.
#34: resize 30%, then 80%.  Duplicate and flip.
45: resize 30% and mirror.
#67: resize 25%; duplicate and flip.
#70: resize 15%; free rotate 15 degrees right; duplicate and flip.  Paste again, free rotate 55 degrees left.
#71: resize 32%; duplicate and flip, duplicate once again.
#78: resize 10%; mirror and flip.

Apply drop shadow of choice to all elements, I used: H&V 2, Opacity 55, Blur 10.

Hide the background layer and merge visible.  Resize the merged layer 85%.  Unhide the background layer and add a new raster layer.  Select all, copy and paste paper #3 into the selection; deselect.  Apply Vaybs mask #111 and merge the mask group.  Use the raster deform tool to adjust size and placement.

Crop and resize your tag.

Activate the text tool and select the Doris Day font; Size 115, Stroke 0, Create as a vector.  Set background to #ccc46f.  Type your name and place where you like.  Layers > Convert to Raster Layer.

Effects > Plugins > Eye Candy 4000 > Gradient Glow with these settings:

Under the Colour tab: choose Medium and change the colour to #420004.

Under the Basic tab:

Glow Width: 3.00
Soft Corners: 0
Overal Opacity: 100
Draw Only Outside Selection: checked

Click OK.

Apply drop shadow of choice, I used: H&V 2, Opacity 65, Blur 10.

Add all applicable copyright and license information.  Save as a png or jpg and you're finished, enjoy your new tag!

Hugs, Carol

13 February 2013

My Bloody Valentine (FTU)

My Bloody Valentine

This tutorial was written by me on February 13th, 2013 and was written assuming you have a  general knowledge of PSP.  You will need the following supplies:

Wonderful FTU kit by Randy's Sin called "Dark Love" is available to download from her blog HERE.  Be sure to say thanks when you grab it, it's a small gesture for hard work freely shared and means a lot!  : )

I used the gorgeous art of Henning Ludvigsen.  This tube is called "The Rapture" and is available at Up Your Art.  You must have a license to use.

WordArt I created for this tut, download HERE.

Template #17 by Tracy F. Designz, download HERE.

Mask #156 by Vaybs, download HERE.

Font used: Bank Gothic Medium

~~ Remember to save often! ~~

Place the mask in your PSP mask folder or a folder of your choice.

Open the template in PSP, shift + d to duplicate, close original.

Delete the credit layer.  Change the canvas size to 800 by 800 with the following placement settings:

Top: 170
Bottom: 171
Left: 136
Right: 136

Click OK.

Add a new raster layer, send to the bottom and flood fill with white.

Activate the circle layer; select all, float and defloat.  From the kit, open Paper 7 and resize 70%.  Copy and paste as a new layer, invert selection and tap delete.  Deselect and delete original layer.

Activate the rectangle layer; select all, float and defloat.  Open Paper 8 and resize 70%.  Copy and paste as a new layer, invert selection and tap delete.  Do not deselect.

Copy and paste the tube as a new layer and arrange as shown within the selection.  Tap delete and deselect.  Change the blend mode to Luminance (L) and reduce the opacity to 75%.  Delete the original layer.

Activate the square 1 layer; select all, float and defloat.  Copy and paste Paper 8 (resized 70%) as a new layer.  Invert selection and tap delete, deselect.  Delete original layer.  Repeat for square 2 layer.

For all the frame layers, follow these steps:

Select all, float and defloat.  Add a new raster layer and flood fill with #d7d8d9.  Deselect and delete original layer.

Adjust > Add/Remove Noise > Add Noise > Gaussian, 75%, Monochrome checked.  Click OK.

Apply drop shadow to all frames, I used H&V 2, Opacity 65, Blur 10. 

Open my WordArt in PSP.

Activate "Be Mine" layer.  Copy and paste as a new layer and arrange as shown or to your preference.  Add a drop shadow of choice, I used H&V 2, Opacity 65, Blur 5.

Activate "Forever" layer.  Copy and paste as a new layer and arrange.  Select all, float and defloat.  Add a new raster layer and flood fill with #620006.  Deselect and delete original layer.  Apply drop shadow above.

Resize the tube 80%, copy and paste as a new layer.  Arrange on the left side of the tag.  Apply drop shadow of choice.  I used H&V 2, Opacity 65, Blur 15.

Add your elements, I used:

candle1: resize 40%; duplicate and mirror, resize 85%
rose arch1: resize 70% and arrange as shown, erase excess at bottom
champagne bucket: resize 30%
champagne glass1: resize 20%, then 90%; duplicate
rose1: resize 30% and arrange on right side.  Duplicate and move copy to the left side; free rotate 20 degrees left.
rose2: resize 30% and arrange below the first rose; duplicate and move to the left side; free rotate 12 degrees right.  Arrange and erase any excess showing at the bottom.

Apply drop shadow to elements, I used H&V 2, Opacity 65, Blur 10.

Hide the background layer and merge visible.  Unhide the background layer and add a new raster layer.  Select all, copy and paste Paper 1 into the selection; deselect.  Apply DBV mask #156 and merge mask group.  Adjust mask size and placement with the raster deform tool.

Crop and resize your tag.

Activate the font tool.  Select the Bank Gothic Medium font, size 48, stroke 0, create as vector, set the background colour to black.  Type your name and arrange where desired.  Layers > Convert to Raster layer.  Apply drop shadow, I used H&V 2, Opacity 65, Blur 5.

Add all applicable copyright and license information.  Save as a png or jpg and you're finished!  Thanks for trying my tutorial.

I'd love to see your results, email me HERE.

Hugs, Carol

09 February 2013

Sweetheart (FTU)

(Click tag to see full-size image)

Sweetheart

This tutorial was written by me on February 9th, 2013 and was written assuming you have a general knowledge of PSP.  You will need the following supplies:

I used the beautiful artwork of Renee Lavoie.  This gorgeous tube is entitled "Scarlette" and can be purchased at PSP TubeStop.  You must have a license to use.

I used an awesome FTU kit called "Shot Through The Heart" by Vix PSP.

Plug-in used: Xero Radiance

Mask #42 by Weescotslass.

Font used: Janda Quirky Girl

Drop shadow used throughout: H&V 2, Opacity 50, Blur 10.

~~ Remember to save often! ~~

Place the mask in your PSP mask folder or a folder of your choice.

Open a new image, 750 x 750, white background.

From the kit, open E2 and resize 80%.  Copy and paste as a new layer.

Using the magic wand, click inside the frame.  Selections > Modify > Expand > expand 5.

Open the image that comes with the tube and resize 85%.  Copy and paste as a new layer and move below the frame.  Position as shown, invert the selection and tap delete.  Deselect.  Apply drop shadow to the frame.

Apply the Xero Radiance plug-in to the image using these settings:


Click OK.

Copy and paste the tube as a new layer and position to the right of the frame.  Drop shadow.

Add your elements, I used:

E5: resize 15%, duplicate and mirror, duplicate again and resize 70%.  Repeat as desired.
E6: resize 40%, then 85%
E7: resize 40%
E17: resize 85%
E21: resize 50%
E23: resize 50%, then 80%

Apply drop shadow to all elements.

Hide the background layer and add a new raster layer.  Select all.  Copy and paste P3 into the selection, deselect.  Apply WSL mask #42 and merge the mask group.  Use the raster deform tool to adjust mask size and placement.

Foreground: #f1e2b5
Background: #671e20

Open the text tool and select Janda Quirky Girl.  Size 72, Stroke 1, create as Vector.  Type your name and position where desired.  Layers > Convert to Raster Layer.  Apply drop shadow, I used H&V 2, Opacity 50, Blur 5.

Add all applicable copyright and license information.  Save as a png or jpg and you're finished.  Enjoy and thanks for trying my tutorial!

I'd love to see your results, email me HERE.

Hugs, Carol

Love Is In The Air (FTU)

(Click tag to see full-size image)

Love Is In The Air

This tutorial was written by me on February 9th, 2013 and was written assuming you have a general knowledge of PSP.  You will need the following supplies:

I used the gorgeous art of Mitzi Sato Wiuff.  This tube is entitled "Romanza" and is breathtaking!  You can purchase Mitzi's tubes at PSP TubeStop.  You must have a license to use.

I used a lovely FTU kit called "Love Me Love You" by Mirella at A Space Between.  Please download from her blog HERE.

"Hearts On Ice" template #4 from Twyzted T's Playroom.

Plug-in used: Eye Candy 4000 Gradient Glow (for name).

Mask #3 from DeeSign Depot.  Download from her blog HERE (scroll down).

Font used: Shalimar Swash, a pay font.  Any fun script font will work, try Susie's Hand, HERE.

~~ Remember to save often! ~~

Place the mask in your PSP mask folder or a folder of your choice.

Open the template in PSP, shift + d to duplicate and close the original.

Delete Raster 11 and all the shadow layers.  Resize all layers 80%, then change the canvas size to 800 x 750.

Unhide Raster 1, activate and flood fill the blank area with white.

Activate Raster 5, select all, float and defloat.  From the kit, open Paper 11 and resize 65%.  Copy and paste as a new layer and move into place.  Invert selection and tap delete.  Deselect and delete original layer.  Apply a drop shadow of choice, I used H&V 0, Opacity 62, Blur 12.

Repeat the steps above for Copy of Raster 5 layer.

Activate Raster 6, select all, float and defloat.  Open Paper 16 and resize 70%.  Copy and paste as a new layer, invert selection and tap delete.  Deselect and delete original layer.

Activate Raster 8 and apply drop shadow.  I used H&V 2, Opacity 62, Blur 10.

Activate Raster 7, select all, float and defloat.  Open Paper 4 and resize 75%.  Copy and paste as a new layer, invert selection and tap delete.  Deselect and delete original layer.

Activate Raster 9 and apply drop shadow above.

Activate Raster 2, select all, float and defloat.  Open Paper 1 and resize 70%.  Copy and paste as a new layer, invert selection and tap delete.  Deselect and delete original layer.

Activate Raster 3 and apply drop shadow above.

Activate Copy of Raster 2, select all, float and defloat.  Copy and paste Paper 1 as a new layer (it will still be on the clipboard), invert the selection and tap delete.  Do not deselect.  Open the Romanza Girl tube and resize 120%.  Copy and paste as a new layer and move into place within the selection.  See my tag for placement.  Tap delete and deselect.  Change the blend mode to Multiply and reduce the opacity as desired - 50% to 65%.  Apply drop shadow above. 

Activate Raster 4 and apply drop shadow.  Repeat for Raster 10 and Copy Of Raster 10.

Copy and paste the Romanza Girl tube as a new layer.  Move to the left side of the tag.  Apply drop shadow.

Now have some fun and add your elements.  I used:

#3: resize 20%, then 80%
#6: resize 40%; free rotate 85 degrees right.  Duplicate and mirror.
#11: resize 25%, then 85%.  Duplicate as desired, mirror some and resize some copies a further 85%.
#12: resize 20%; free rotate 20 degrees left and sharpen.  Duplicate and mirror
#13: resize 60%; free rotate 65 degrees right
#14: resize 60%
 #21: resize 50%
#22: resize 20%
#32: resize 30%, duplicate and mirror as desired.
Resize the butterfly that comes with the tube 35%.  Copy and paste as a new layer.

Apply drop shadow above to all elements.

Hide background layer, merge visible all other layers.  Resize merged layer 85%.

Unhide background layer and add a new raster layer.  Select all.  Copy and paste Paper 12 into the selection.  Deselect.  Apply DeeSign Depot mask #3 and merge the mask group.  Use the raster deform tool to adjust mask size and placement.

Crop and resize your tag.  Add your name using colour #5a1102 and apply Eye Candy 4000 Gradient Glow (if using).  Under the Colour tab, select "Medium" and change the colour to #f8ebc2.  Under the Basic tab, change the settings to this:



Add all applicable copyright and license information and you're done!  Enjoy your new tag!

I'd love to see your results, email me HERE.

Hugs, Carol

Tags Made With My Tuts

My Awards

Photobucket
Photobucket
Photobucket
Photobucket